http://WWW.PEBSTEELSTRUCTURE.COM
NEWSKY 57dfddd59ec6681478598d56 False 39 67
OK
background image not found
Found results for
'hole'
Self Tapping screw INR   30 INR  30
-0%

Self Tapping screw

A self-tapping screw is a screw that can tap its own hole as it is driven into the material. For hard substrates such as metal or hard plastics, the self-tapping ability is often created by cutting a gap in the continuity of the thread on the screw, generating a flute and cutting edge similar to those on a tap

INR 30 INR 30

Availability:True

Pay mode:COD only

view details
Self Drilling Screws INR   30 INR  30
-0%

Self Drilling Screws

The most common material used in fasteners, this material is predominantly iron mixed with carbon. It offers the highest strength compared to other metals and elements, but is the least corrosion resistant. Fasteners, used for attaching panels and trims to grits and purlin, which drill their own hole and eliminate the pre-drilling operation,

INR 30 INR 30

Availability:True

Pay mode:COD only

view details
Stitch screws INR   20 INR  20
-0%

Stitch screws

Stitch screws are used to stitch at overlap location and to plug holes in steel panels

INR 20 INR 20

Availability:True

Pay mode:COD only

view details
Pop Rivet INR   30 INR  30
-0%

Pop Rivet

Pop Rivet light gauge metal trims used for joints flashing. Pop rivets are installed in a tight hole that passes through the materials being riveted . A riveter is used to pull the mandrel back while holding the rivet in place,

INR 30 INR 30

Availability:True

Pay mode:COD only

view details
Erection INR   160 INR  160
-0%

Erection

Erection of the PEB can be completed in within very less time because all the components are pre fabricated in the factory and are engineered for onsite assembly. These components are also pre marked for easy identification and to accelerate the erection and reduce the installation time of the whole building

INR 160 INR 160

Availability:True

Pay mode:COD only

view details
NUTS & BOLTS INR   65 INR  65
-0%

NUTS & BOLTS

A nut is a type of fastener with a threaded hole. Nuts are almost always used in conjunction with a mating bolt to fasten two or more parts together. The two partners are kept together by a combination of their threads' friction (with slight elastic deformation), a slight stretching of the bolt, and compression of the parts to be held together. In applications where vibration or rotation may work a nut loose, various locking mechanisms may be employed: lock washers, jam nuts, specialist adhesive thread-locking fluid such as Loctite, safety pins (split pins) or lockwire in conjunction with castellated nuts, nylon inserts (Nyloc nut), or slightly oval-shaped threads.

INR 65 INR 65

Availability:True

Pay mode:COD only

view details
1
false